Camera Link™ I/F 1.2M Pixel(1.2M) Camera
Overview
ID1MB-CL/ID1MC-CL is a Camera Link interfaced and 1.2Mega resolution camera module.1.2Mega pixels CMOS sensor with 1/3 inch type is utilized. Entire pixels can be read out within 1/54s at CL Base Configuration output.
 |
 |
| ID1MB-CL | ID1MB-CL Rear side |
Fundamental Specification
| Model Number | 1.2Mega CMOS Camera ID1MB-CL (B/W) ID1MC-CL (COLOR) |
|
|---|---|---|
| Output Interface | Camera Link 1Tap Base Configuration, 2Tap Base Configuration, Base Configuration 24bit – RGB | |
| Image Sensor | 1/3 inch type global shutter (ON Semiconductor AR0135) | |
| Image Circle | All pixels Φ6mm / VGA mode φ3mm / QVGA mode φ1.5mm | |
| Pixel Size | 3.75μm(H) x 3.75μm(V) | |
| Image Output | Effective Pixel 1,284(H) x 962(V) | |
| Pixel Clock | 1Tap / 24bit-RGB : 74.25MHz 2Tap : 37.125MHz |
|
| Output Format | Effective pixel 1,284 (H) x 962 (V) | |
| Frame Rate （To be accelerated by adjusting vertical line number） |
All pixels：54.08fps VGA モード：105.51fps QVGA モード：200.35fps |
|
| Gain | 0～+12db | |
| Shutter Speed | Normal shutter mode 1 / 54000s ~ OFF (1 / 54s) Fixed shutter trigger mode 1 / 45000s ~ OFF (1 / 45s) |
|
| Partial Scan | ROI:1area (Minimum 4 line) | |
| Trigger Mode | Fixed shutter trigger mode | |
| Signal Output | Camera Link Base or PoCL Base | |
| Signal Output Connector | Camera Link / PoCL SDR 26pin | |
| Lens Mount | C Mount | |
| External Trigger Inputs | PoCL or Hirose 12pin | |
| Power Voltage | DC+12V±10% | |
| Power Consumption | typ 0.9 W or below max 1.1 W or below |
|
| Size(excluding projections) | 29mm x 29mm x 29mm | |
| Weight | About 50g | |
| Environment | Temperature 0～+40℃ Humidity 0～90％RH Non condensation | |
Spectral Response
※Excludes lens and light source characteristics.
Monochrome
Color
Dimensions
ID1MCL_20220225_en.pdf（PDF:1.1Mb）